If you replace your rear disassembly pin and replace it with our modified disassembly pin combined with a new magazine lock that replaces your factory bolt closure, you will have an all-Californian AR. You no longer need to use an AR solution without functionality. Our system allows you to maintain all your current functions, including a pistol grip, a front grip and an adjustable shaft. You can even reinstall a version of Mil-Spec magazine. No need for a smart key. To purchase a standard magazine release button, click here. These new laws apply to firearms that do not have a fixed magazine. The laws define a “fixed magazine” as an ammunition supply device contained in or permanently attached to a firearm so that the instrument cannot be removed without dismantling the action of the firearm. This formulation essentially renders other charger latches unusable. AR-15 owners must now disassemble their firearms to release the magazine.
SB 880 amends the definition of an assault weapon to refer to a rifle that has one of the many specified military characteristics and “does not have a fixed magazine” rather than a weapon with any of these characteristics and the “ability to accept a removable magazine”. Continued legal possession requires you to register and pay a fee (TAXES) for ALL of your half-cars that have been newly classified as “offensive weapons.” One of the features that sets us apart is our modified quick disassembly pin, which acts as a button to separate the top from the bottom, just enough to disable semi-automatic operation and automatically disable the magazine lock. As soon as your rod is separated and separated from the semi-automatic operation, unlocking your charger is now usable. A simple faucet closes the top part and re-engages the spring-loaded disassembly pin and quickly brings you back into battle. The Hellfighter Mod Kit is compatible with any Mil-Spec AR-15 or DPMS Platform AR-10. The AR-10 kit works with inverted or ground locking. The AR MagLock turns your firearm into a “fixed magazine” firearm that the magazine cannot release unless you pull the disassembly pen and separate the upper and lower receivers, which “disassembles” the action of the firearm. Once the receivers are separated to a minimum, the ARMagLock can be activated to release the charger.
Step 2: GO FASTER!! Now that you`ve become compliant, it`s time to go faster! With a combination of the ARMaglock and patriot pin, you can charge your AR-15 faster than ever, even faster than the now illegal bullet button! Evolusion Concepts, Inc., distributors or sellers of AR MAGLOCK, cannot be held responsible for any bodily injury, death or property damage caused by inaccurate assembly, misuse, illegal use or modification of this product. Handle your firearm responsibly and safely at all times. Step 1: BECOME COMPLIANT!!! The new law states that you must have a non-function ar or disassemble your rifle before you can release and reload the magazine. By installing an ARMaglock, you now have by definition an ar compatible with California under the new laws. Our CA Magazine Release Button Lock is California compliant as the top receiver must be opened to release the locking piston so that the magazine button can be pressed and the magazine removed. You need to modify your lower receiver by drilling a hole in the cavity of the store button. We will not answer legal questions under any circumstances as we have no legal training or experience. If you have any questions about the configuration, circumstances and/or possible criminal exposure, please contact an experienced local firearms lawyer. Most will advise you on these points free of charge during their first consultation. Chipmunk™ AR-15 Snap Lock CA AR-15 tactical compliance device. The Snap Lock works in the same way as a Patriot Mag unlock and does not allow you to release the AR charger until the top receiver is separated from the bottom receiver via the rear removal pin. California 2020 compliant! Cross Armory`s SAFE MAG is designed to comply with solid magazine laws, which state that your firearm must have a “fixed magazine” defined as an “ammunition supply device contained in or permanently attached to a firearm in such a way that the device cannot be removed without dismantling the action of the firearm.” The gun action of an AR-15 and an M4 is housed in the upper and lower receivers.
If you disconnect the upper and lower receivers to release your magazine, the action of the firearm will be deactivated. If you do not comply with the new laws, you will need to register your firearm as an “assault rifle”. This essentially makes your rifle useless and makes it very limited where you can use your rifle, including all shooting ranges in California. Under the new laws, you can avoid registration by switching to a California-compatible ar with very little effort with our Patriot Pin/AR Maglock kit. New Frontier Version / Palmetto State Armory Pistol Caliber Patriot Mag. (2017 CA Compliant Model) Cross Armory`s SAFE MAG is a modification developed in California for weapons in regulated states that require stationary magazines. The Cross Armory SAFE MAG releases your charger immediately when you disconnect the top and bottom receivers from your AR-15 or M4 without having to press a button. Just to make sure there is no confusion, the new CA Act states (b) (1) Any person who is from January 1, 2001 to January 31. December 2016 legally possessed an assault weapon that does not have a fixed magazine within the meaning of Article 30515, including those with an ammunition supply device that can be easily removed from the firearm with a tool, the firearm must be registered before January 1, 2018. See here for the exact wording of the law: SB 880. Your email address will not be published. Required fields are marked with an *.
Sig Sauer MPX & MCX / Lancer Patriot Mag output kit. Comes with an extended rear disassembly spindle. This product/kit makes your GIS MPX & MCX/Lancer 2020 California compliant! Colt 901 LE .308 Patriot Mag Release Kit with extended rear disassembly pin and paracord. The Colt 901LE Patriot Mag version is intended for the NATO .308 / 7.62x51mm platform. California 2020 compliant! The Loop Hole is a 7075 aluminum thumb hook that can be added to any pistol grip replacement without feature or non-functional shaft. It allows complete control of the rifle with one hand and is strong enough to lift the entire rifle. It eliminates the uncomfortable grip required on most non-functional shafts. A truly awesome CA-compliant accessory for California gun owners in 2018 and beyond! Patriot Pin products are made from type 3 hard anodized aluminum and Delrin (a self-lubricating polymer with industrial strength) to increase the durability of the resistance.
100% developed and manufactured in the USA! The support and arm are made of high-quality CNC billet aluminum and are hard anodized type 3. The disassembly pin is made of a copolymer material that is self-lubricating and does not wear out your lower receiver. Do NOT use with magazines with a capacity greater than 10 shots. ORDERS OF 6 OR FEWER KITS ARE SHIPPED VIA USPS. The Patriot pin is very easy to install and does not require any permanent changes to your rifle. At any time, when the law changes or you leave the state, the Patriot pin is easily removable so you can return to stock. Release of Kel-Tec Sub 2000 Gen 2 Patriot Mag. This version of Patriot Mag runs on *ALL* KelTec Sub2k Gen 2 models (Glock, Beretta, etc.). California 2020 compliant! NOTE: This Patriot Mag version only works on the *Gen 2*Sub 2000 carabiner. AR MagLock is a new patented AR-15 fixed-loader solution that allows AR-15 owners to avoid registering offensive weapons in their respective states by complying with the law. Evolusion Concepts, Inc.
(author and seller) of AR MAGLOCK is not responsible for your understanding or interpretation of laws and regulations. We are proud to introduce the Hellfighter Mod Kit, the perfect and ultra-fast charger lock solution compliant with the California standard for your AR-10 or AR-15.